Hi friends. In this article we will show you appealing stairs light up with LED each time you step. Stair lifts are so beneficial for people who have difficulty climbing stairs, effectively allowing them to reach the top or bottom of a flight of stairs by sitting on a seat, which electronically moving up and down the stairwell. Sometimes, if the lighting is not bright enough, it can be difficult to see stair lift. One solution is to create a lighted path along the stairwell using strings of LED lights. Measure the length of the opening in the floor slab from the bottom all the way to the top along the diagonal. If you choose enough strings of LED stair lights to match the measurement. Heat up a hot glue gun for 10 minutes. Squeeze a line of hot glue along the top angle of the opening in the floor slab opposite the stair lift. The next thing you need to do is to press the strings of LED stair lights on the hot glue line. Make sure the connector at the end of the strings can reach a power outlet. Allow to cool and heat the glue to cure for two minutes. Plug in the strings of LED lights to illuminate the stair lift. Maybe this instructions are hard for you, but you could try.
How cool is to step on the stairs and the light to turn on. In this way you save energy and your stairs will have enough light. Otherwise, you could use a button for switch on the light and for turning off the light. It’s so cool thing. This was in short how to install LED lighting on your indoor or outdoor stairs. Enjoy in the hereinafter appealing stairs light up with LED each time you step. Thank you for your attention!